Parts, fixtures and gauges for automotive and commercial-vehicle suppliers

Low- and mid-volume machined and sheet metal parts, fixtures and gauges for Tier 1 and Tier 2 suppliers, sourced in Bursa, one of Türkiye's main automotive manufacturing regions. Series safety parts that require IATF 16949 are outside what we offer.

Email a drawing
L-shaped milled aluminium bracket with a large bore and countersunk mounting holes
IndustryAutomotive & commercial vehicles
Typical partsBrackets, housings, fixtures and gauges, commercial-vehicle parts
MaterialsSteel, stainless, aluminium
VolumeLow and mid volume
Not offeredSeries safety parts requiring IATF 16949
Contactsales@ertas.engineering

Parts we quote for automotive suppliers

Typical parts and what the drawing usually asks for. Your drawing decides; this is where we usually start.

PartTypical materialProcessWhat the drawing usually asks for
BracketsSteel, aluminiumSheet metal, CNC millingHole positions, bend dimensions, coating to your specification
HousingsAluminium, steelCNC milling, CNC turningBore fits, sealing faces, thread depths
Assembly and welding fixturesSteel, aluminiumCNC milling, welded assembliesLocating features and datum positions, measurement report
Check gaugesSteel, aluminiumCNC milling, CNC turningTight tolerances on gauging features, measurement report
Commercial-vehicle partsSteel, stainlessCNC turning, CNC milling, welded assembliesFits, weld quality level, corrosion protection

Materials: steel, stainless, aluminium, per drawing. Series safety parts that require IATF 16949 are not quoted.

What we check before parts leave

The points automotive drawings usually call out, checked against your drawing.

  1. Drawing revisionEach batch is checked against the revision on your order.
  2. Datums and locating featuresOn fixtures and gauges, datum and locating features are measured and reported.
  3. First articleA first-article report for new parts when your order asks for one.
  4. Material on paperMaterial documented to EN 10204 3.1 and matched to the grade on your drawing.
  5. Critical dimensionsA measurement report for the features you mark, delivered with the parts.
  6. PackingParts packed so that surfaces and threads arrive undamaged.
ScopeWe do not hold IATF 16949 and do not quote series safety parts that require it. Low- and mid-volume parts, fixtures, gauges and commercial-vehicle parts are where we work.

Guides

Short references we use ourselves when reviewing a drawing.

Automotive Tier 2 machining from TürkiyeGuide
PPAP for Tier 2 suppliers: submission levels and elementsGuide
ISO 9001, IATF 16949, AS9100: which supplier certificate mattersGuide

Other industries

Same network, same documents, different drawings.

Industrial & special machineryPlates, housings, frames, welded basesAgricultural & construction machineryWelded frames, brackets, pins, hydraulic blocksEnergy & electrical equipmentCopper busbars, enclosures, machined bracketsHydraulics & fluid powerManifolds, valve blocks, turned partsPhotonics & lasersHousings, mounts, baseplates, cooling platesRobotics & automationJoint housings, grippers, frames in small seriesVacuum & semiconductor equipmentChambers, flanges, fixtures (non-litho)Research, cryogenics & quantumCryostat and beamline partsTest, measurement & labInstrument frames and precision partsData-center cooling & powerWelded manifolds, frames, enclosures

Send the drawing

Attach the drawing, the quantity per call-off and the documents you need. You get a route, a price and a lead time back.

SupplierErtaş Engineering
IndustryAutomotive & commercial vehicles
SendDrawing, quantity, required documents
Contactsales@ertas.engineering