Busbars, enclosures and machined parts for energy and electrical equipment
Copper busbars, sheet metal enclosures and machined parts for switchgear, power distribution and wind equipment. Main structural wind parts such as towers and blades are outside our scope. Made in our audited network in Bursa, to your drawing.
| Industry | Energy & electrical equipment |
|---|---|
| Typical parts | Copper busbars, enclosures and panels, machined brackets |
| Materials | Copper, aluminium, galvanised and stainless sheet |
| Not offered | Wind towers, blades and other main structural parts |
| Contact | sales@ertas.engineering |
Parts we quote for electrical equipment builders
Typical parts and what the drawing usually asks for. Your drawing decides; this is where we usually start.
| Part | Typical material | Process | What the drawing usually asks for |
|---|---|---|---|
| Copper busbars | Copper | Sheet metal, CNC milling | Hole patterns, bend dimensions, burr-free contact faces, plating where specified |
| Enclosures and cabinet panels | Galvanised sheet, stainless sheet | Sheet metal, assembly & finishing | Bend dimensions, cut-outs to the drawing, coating to your specification |
| Mounting plates and rails | Aluminium, galvanised sheet | Sheet metal, CNC milling | Hole positions, flatness of mounting faces |
| Machined brackets | Aluminium, steel | CNC milling | Hole positions, thread depths, general tolerances to ISO 2768-m |
| Auxiliary parts for wind equipment | Steel, aluminium | CNC milling, sheet metal | Per drawing; main structural parts such as towers and blades are not quoted |
Materials: copper, aluminium, galvanised and stainless sheet.
What we check before parts leave
The points electrical drawings usually call out, checked against your drawing.
- Contact facesBusbar contact faces and holes checked for burrs and damage.
- Hole patternsHole positions on busbars and panels measured against the drawing.
- Bend dimensionsBend angles and flange lengths checked on sheet metal parts.
- Coating and platingCoating or plating checked against your specification before packing.
- Material on paperMaterial documented to EN 10204 3.1 and matched to the grade on your drawing.
- Critical dimensionsA measurement report for the features you mark, delivered with the parts.
ScopeMain structural wind parts such as towers and blades are outside our scope. We quote the machined, sheet metal and copper parts around them.
Guides
Short references we use ourselves when reviewing a drawing.
Other industries
Same network, same documents, different drawings.
Industrial & special machineryPlates, housings, frames, welded basesAutomotive & commercial vehiclesLow- and mid-volume parts, fixtures and gaugesAgricultural & construction machineryWelded frames, brackets, pins, hydraulic blocksHydraulics & fluid powerManifolds, valve blocks, turned partsPhotonics & lasersHousings, mounts, baseplates, cooling platesRobotics & automationJoint housings, grippers, frames in small seriesVacuum & semiconductor equipmentChambers, flanges, fixtures (non-litho)Research, cryogenics & quantumCryostat and beamline partsTest, measurement & labInstrument frames and precision partsData-center cooling & powerWelded manifolds, frames, enclosures
Send the drawing
Attach the drawing, the quantity and your coating or plating specification. You get a route, a price and a lead time back.
| Supplier | Ertaş Engineering |
|---|---|
| Industry | Energy & electrical equipment |
| Send | Drawing, quantity, coating specification |
| Contact | sales@ertas.engineering |