Welded and sheet metal parts for data-center cooling and power
Welded manifolds, frames and enclosures for cooling and power equipment. These drawings turn on weld qualification and leak-tested assemblies. Made in our audited network in Bursa, to your drawing.
| Industry | Data-center cooling & power |
|---|---|
| Typical parts | Welded manifolds, frames, enclosures |
| Materials | 1.4301 / 1.4404, steel, Al sheet |
| Verification | Weld qualification, leak test |
| Contact | sales@ertas.engineering |
Parts we quote for cooling and power equipment builders
Typical parts and what the drawing usually asks for. Your drawing decides; this is where we usually start.
| Part | Typical material | Process | What the drawing usually asks for |
|---|---|---|---|
| Coolant manifolds | 1.4301 / 1.4404 | Welded assemblies, CNC milling | Weld seams to the drawing, tight joints, clean inner surfaces, leak test to the stated method |
| Frames for cooling units | Steel, 1.4301 | Welded assemblies, CNC milling | Square frame, mounting faces machined after welding, coating to your specification |
| Enclosures and panels | Al sheet, steel, 1.4301 sheet | Sheet metal | Burr-free edges, cut-outs and perforation to the drawing, consistent finish |
| Connection blocks and ports | 1.4404, Al 6061 | CNC milling | Thread quality, sealing faces, port positions |
| Brackets for power equipment | Steel, Al sheet | Sheet metal, welded assemblies | Hole patterns, bend angles, coating to your specification |
Materials: stainless 1.4301/1.4404, steel, aluminium sheet.
What we check before parts leave
The points cooling and power drawings usually call out, checked against your drawing.
- Weld qualificationWelding procedures and welder qualifications matched to the requirement on your drawing, with the documents delivered on request.
- Leak testManifolds and other media-carrying assemblies leak tested to the method and limit on the drawing, with a test record per part.
- Weld seamsWeld seams checked visually against the quality level on the drawing.
- Clean insideInner surfaces of manifolds checked for weld spatter, scale and chips before closing and packing.
- Material on paperMaterial documented to EN 10204 3.1 and matched to the grade on your drawing.
- Critical dimensionsA measurement report for the features you mark, delivered with the parts.
Guides
Short references we use ourselves when reviewing a drawing.
Other industries
Same network, same documents, different drawings.
Industrial & special machineryPlates, housings, frames, welded basesAutomotive & commercial vehiclesLow- and mid-volume parts, fixtures and gaugesAgricultural & construction machineryWelded frames, brackets, pins, hydraulic blocksEnergy & electrical equipmentCopper busbars, enclosures, machined bracketsHydraulics & fluid powerManifolds, valve blocks, turned partsPhotonics & lasersHousings, mounts, baseplates, cooling platesRobotics & automationJoint housings, grippers, frames in small seriesVacuum & semiconductor equipmentChambers, flanges, fixtures (non-litho)Research, cryogenics & quantumCryostat and beamline partsTest, measurement & labInstrument frames and precision parts
Send the drawing
Attach the drawing, the quantity and the test requirements. You get a route, a price and a lead time back.
| Supplier | Ertaş Engineering |
|---|---|
| Industry | Data-center cooling & power |
| Send | Drawing, quantity, test requirements |
| Contact | sales@ertas.engineering |